Type 1 (Class A)

This material is manufactured from crushed Pit Run Gravel reducing it to a maximum size of 20mm or ¾”. Its primary uses are top dressing for roadways, parking areas, and driveways as it tends to compact and drain very well. It is recommended that this product is applied in 2” – 6” layers. It can be placed to fine grade with a dozer or grader.

Type 2 (3" Minus)

It is a well-draining material manufactured from Pit Run Gravel. It is reduced to a size of 3 ¼” (80mm). Its primary uses are for farm roads, soft spots in driveways, backfill around foundations, and as a road base. It compacts very well and is typically covered with Type 1 Gravel. This product should be applied in 6” – 8” layers.

​

Crusher Dust

Is a product imported from Halifax, primarily used in walkways, driveways and is bluish grey in colour.

Pit Class A

It is a mixture of ½' minus stone and fine sand.

3/8” Pea Stone

This product comes from the screening of sand through a series of screens separating the fine, medium and coarse materials. The product is 3/8” – 5/8” in size and is smooth like river stone. It makes an ideal base for playground equipment but is not recommended for walkways as it does not compact well due to its smooth surface.

​

​

​​

½”-1 ½” Clearstone 

This product is created from a deposit of Quartzite, which is blasted to a size ranging from 6”- 24”, then crushed to 3/4”. The fines are screened off leaving a product ranging from 1/2” – 1-1/2” which is ideal for drainage purposes and can be used in the mixing of concrete also. After being washed (by a mechanical system or rainfall) this material becomes very clean. This product is NOT recommended for driveways as it does not compact.

1 to 2 inch washed natural granite stone

This is a great rock for decorative landscaping and can also be used for drainage purposes. It has a rough surface and has a sparkle when it is dry.

¾ inch washed stone

This stone is used for drainage purposes and is used as the material beneath floors during construction.

Topsoil

Its primary use is for growing grass, lawn work, septic disposal bed covering, and for filling plant pots. This material should be applied in 1” – 6” layers depending upon the purpose. It must be a minimum of 4” in depth for growing grass

Fill Material

It is the unscreened material that is dug out directly from the bank.